UltraNav TrackPoint sensitivity hack

I have Lenovo ThinkPad X220 on which I am using the Synaptics UltraNav TrackPoint stick as mouse. Upgrade to Windows 10 made mouse slow enough to cause strain because of the extra force required, even when the Windows mouse speed setting was maxed out. In Windows 10 64-bit the latest UltraNav driver version has no specific controls for changing TrackPoint sensitivity like there used to be with Windows 7. But the sensitivity setting still exists as a registry key, as I found out by adjusting it using UltraNav driver version and monitoring the registry with Regshot. The registry settings still work with driver version and can be changed using RegEdit, here to fastest possible, the way I like it:

This is the setting to speed up TrackPoint in RegEdit

Or you can just use this .reg file: UltraNavHack.reg. The setting will take effect if you visit Additional mouse options (even if you click cancel to back out).

The original value was 0x00000004. Don't fool around too much with different values, or you may have to reinstall the drivers.

Other ThinkPad models that may have this problem use the same driver version and can be found listed in its readme: Helix, Helix 2nd Gen (Machine types: 20CG, 20CH), S1 Yoga, S430, T420, T420i, T420s, T420si, T430, T430i, T430s, T430si, T431s, T440, T440p, T440s, T530, T530i, T540p, T550, Twist S230u, Twist, W530, W541, W550s, X1, X1 Hybrid, X1 Carbon, X1 Carbon (Machine types: 20A7, 20A8), X1 Helix, X1 Helix 3G, X220, X220i, X220i Tablet, X230, X230i, X230 Tablet, X230i Tablet, X230s, X240s, X240.

Based on the comments this still works with the latest Synaptics ThinkPad UltraNav Driver for ThinPad version, which supports the following ThinkPad models: ThinkPad X1 Carbon 3rd Gen (Machine types: 20BS, 20BT), ThinkPad X1 Carbon 4th Gen (Machine types: 20FB, 20FC), ThinkPad X1 Tablet Gen 1 (Machine types: 20GG, 20GH), ThinkPad X1 Yoga Gen 1 (Machine types: 20FQ, 20FR), ThinkPad P50s, ThinkPad T460s, T560, ThinkPad X250.

10 thoughts on “UltraNav TrackPoint sensitivity hack”

  1. This is exactly what I was hoping for! So great, now my problem is finally solved. I tried older UltraNav-Drivers, but there were either complications or, if solved, just mussing functionality. This is the one clean great beautiful solution, and you found it! :)

  2. Thanks for this! Any idea which setting controls “Press To Select” (pressing the trackpoint sends a main mouse click)… I know my X230 can do it (tested under Linux) but Win 10 has no GUI option for this… thx

  3. Hi There this is really useful! Thank you so much! Have been tolerating the new driver since last year when Win10 first published!

  4. Thanks, I’ve been meaning to do this for a while, works in win10 1909 with latest synaptic drivers. Please note that if you click apply or save in the additional option pop up (even if nothing was changed) the registry setting goes back to 4. You might want to adjust the speed first and then hack the sensitivity.

Leave a Reply to John Cancel reply

Your email address will not be published.